Best Wet Tile Saw Under $300

Wet Tile Saw

If you’re searching for the best-wet tile saw under $300, chances are you have a home improvement project in mind. If that’s the case, I’ve put together a list of the best saws just for you.

This list of the best didn’t come together overnight; it’s something I spent a lot of time investigating to ensure my readers got the best of the best.

Compared are the best-wet tile saws under $300:

 The best-wet tile saws we’ve found for under $300, but if you’re in a rush and want to check out our top products on Saw Offers.

SKIL 3540-02 7-Inch Wet Tile Saw is the most famous wet tile saw:

First, I’d like to tell you a little about SKIL and why they’re so renowned. Joseph Sullivan and Edmond Michel, two of the company’s founders, founded Michel Electric Handsaw Co. in 1924.

When Edmond Michel left the company in 1926, its name was changed to “SKIL.” SKIL is a well-known manufacturer of heavy-duty saws, such as the one I’m about to show you.

The first circular saw in the world, the Model 77, was invented by SKIL, and it is still in production today.

They make a range of high-quality items, including tackers, cordless power tools, sealant arms, mixers, belt sanders, and so on, and today I’ll show you one of their best – the SKIL 3540-02.

An explanation to the SKIL 3540-02 7-inch Wet Tile Saw:

This is a wet tile saw, which means diamond-coated blades are using. The saw is corded and weighs 17.7 pounds in total. It can accommodate tiles measuring up to 1212 inches in length. It uses a 7-inch cutting blade to cut tiles and can cut them at angles ranging from 0 to 45 degrees.

The Influence

The SKIL 3540 has you covered when it comes to electricity. This saw is 120V AC only, with a 4.2 amp amperage and 3600 no-load rotations per minute. You’ll be able to cut through several materials with this motor, including masonry, brick, and more.


When you buy a new saw, you want one that will last for several years; thus, you should research it before purchasing a product. I assume this saw will last for many years because it uses a stainless steel table extremely strong and rust and corrosion-resistant.


This tile saw’s Blade is coated in diamond power, allowing it to cut through the wet tile with ease. Take it from me when I say that this Blade will not let you down.


This saw has an excellent adjustable rip fence, so you’ll be able to perfectly match the tile, resulting in an excellent clean cut without having to move it. This saw comes with a miter gauge, which helps you to take accurate measurements and cut at perfect angles.

As you might know, even if you’re an inch off while cutting tile, it won’t match properly, so these two features may come in handy. You will be able to cut materials in a variety of styles thanks to this feature.


You’ll get the following with this saw:

  • 1 blade, 7 inches
  • Blade wrenches a Blade guard.
  • The saw in and of itself (of course)


It’s easy to clean because it’s a wet tile saw with a water reservoir. The water reservoir will assist you in keeping the Blade cool when in use. Furthermore, when you’re cutting, it will wash and clean the debris away.

Tile Saw Blade – As previously said, this saw includes a 7-inch Diamond Blade that ensures smooth and quick cutting every time.

Cutting Consistency – A miter scale and an adjustable rip fence are included to ensure accurate miter and straight cuts every time.

Corrosion-resistant – This saw is corrosion-resistant. The table’s surface is made of corrosion-resistant stainless steel. It can also hold tiles up to 12 inches in diameter.

Cutting Angle – You can make bevel cuts with this aw at any angle between 0 and 45 degrees.

Additional Accessories – This saw comes with a range of useful extras, including Carbide circular saw blades that will help boost performance.


  • The cost is very low – it’s much less expensive than hiring a specialist to complete the task.
  • The diamond blade gives the saw versatility and makes it ideal for small tiles. It is capable of cutting through any kind of household tile as well as small natural stones.
  • It comes with a generous three-year warranty if you register the saw within one month of purchase.


  • Since it is so cheap, don’t expect it to have the same features as higher-end saws.
  • As compared to some of the other wet tile saws currently on the market, it’s a little on the tiny side. However, this isn’t a major problem.

This 7-inch wet tile saw is a perfect option for you if you’re looking for a decent wet tile saw for a household project and don’t want to spend a lot of money on it but still get the job done.

It’s ideal for those who want to complete household DIY projects, and beginners shouldn’t have any trouble learning how to use it.

SKIL 3550-02 is the best-rated wet tile

This is similar to the SKIL 3540 that was previously mentioned but with a bit more strength to cut through tougher tiles. It’s still a 7-inch wet tile saw, but it’s now powered by a 7.0 amp engine.

The SKIL 3550-02 also contains a special Hydrolock Water Guard, which effectively stops water from splashing all over your floor or work area. It’s good if you want to spend less time cleaning up after your work.

Since the 3540-02 only cuts tiles up to 12 x 12, you’ll need the SKIL 3550-02 if you’re cutting larger tiles up to 18 x 18.

In my view, the extra money spent on the SKIL 3550-02 is well worth it; it’s still under $300, and the extra features will make tile cutting much easier.

RIDGID 7″ Wet Tile Saw is portable and ideal for use on the job site

The RIDGID 7′′ portable job site wet tile saw could just be a good choice for those of you looking for a good wet tile saw that is light in weight and can be used for smaller work.

Built-in Handles are a feature of the design.

You shouldn’t expect to be able to use this saw for any job because it’s a 7-inch model. In terms of design, it is very light in weight and has handles on it, making it much easier to bring around.

Anti-Splash Defense:

I’d also like to call attention to the anti-splash scheme, which I believe is very useful. Many of the newer wet tile saws on the market pledge to keep the splashdown, and RIDGID is the only one that follows through.

There is very little water that escapes by using the saw. In fact, I don’t believe you’d have any issues using it in the room where you’re working. Only make sure you put a drop cloth underneath it to catch any drips that may manage to escape – this will also make cleaning easier.

Willn’t Overflow:

The attractive nature will also keep you from overfilling the reservoir. If you try to fill the tank with so much water, it will simply spill out.


  • Extra safety is provided by a roll cage system.
  • A clear splash hood will allow you to see the Blade as well as the cut line.
  • For tiles up to 24 inches in diameter, the table support can be removed.
  • The TrueLock T-square architecture ensures that the cuts remain square.
  • There’s even a blade wrench storage compartment aboard, so you’ll still have one handy.
  • A tilting bevel table allows you to cut bevels at 22.5 degrees and 45 degrees.


  • The weight is light.
  • Easily transportable
  • Transport is easy.


  • Since this saw lacks a sliding table, it may have some limitations.

Overall, if you’re looking for a basic wet tile saw that’s lightweight and easy to transport, this one is a great option. This tile saw is perfect for beginners and those working on home improvement projects.

To cut tile, do I need a wet saw?

Cutting tile made of a tougher material with a wet saw is possible. Diamond blades are used with wet tile saws and can cut even the toughest tile. A wet saw is needed when cutting glass tile.

What Is A Wet Tile Saw And Why Is It Wet?

You’ll need to fill the water pump with water before you can use the wet tile saw. The Blade of the wet saw is coated in tiny diamonds that spin easily to cut through tough materials.

When cutting through a hard or thick tile (such as porcelain tile), the saw’s water pump is important because it prevents the saw from overheating and smoking.


Are you an Entrepreneur or Startup?
Do you have a Success Story to Share?
SugerMint would like to share your success story.
We cover entrepreneur Stories, Startup News, Women entrepreneur stories, and Startup stories

What is the best-wet tile saw? If you’re looking for the best-wet tile saw under $300, I’d recommend any of the options on this list because they’re all the best, in my opinion, or they wouldn’t be on this list. All of the wet tile saws on this list will cut tiles accurately and smoothly, which is a given.